bdawgtxt.gif (4268 bytes)  

ROD NAME:  Hall Of Fame Series – Bull Dawg Rods

DESCRIPTION:  The Hall of Fame Series Bull Dawg Rods were designed by Musky Innovations’ owner Brad Ruh.  They are made with IM9 high modulus tTec Nanoweave graphite.  Each rod has a split grip which means the rod is lighter and more sensitive.  They come complete with 11 Fuji Alconite guides and a strong Fuji reel seat.  The rods are all 8’3” a perfect length for nearly all fishing applications.  The length ensures far accurate casts with ease and allows for extra leverage when it comes time to set the hook.  They also aid in playing a fish to the net with ultimate control.  They come in 3 weights so any lure can be thrown with these rods.

SUPER MAG ROD SPECS:

  • IM9+  tTec Nanoweave graphite

  • 8’3” Extra Heavy

  • 4-16 oz lure weight

  • Heavy super line recommended

 

MAGNUM ROD SPECS:

  • IM9+  tTec Nanoweave graphite

  • 8’3” Heavy

  • 2-10 oz lure weight

  • Heavy super line recommended

 

NOTE: SHIPPING COSTS OF $25 WILL BE ADDED AT TIME OF SHIPMENT FOR 1 TO 5 RODS OF ANY MODEL.


 


Pistol Grip Installation Instructions:

  • Note where you would like to position the handle on the rod.
  • Take electrical tape (or some kind of tape that stretched and is water proof) and wrap the area on the cork handle on your rod were you would like to place the handle This will form a base layer of tape for the handle to sit on and for the top layer of tape to adhere to. This is a must to ensure your handle will not slip while using it.
  • Position the handle on the rod on the base layer of tape. Make sure it is in line with the reel and the rod eyes.
  • Tape each end of the handle securely on the rod making sure to wrap back and forth down the handle, past the handle ends, onto the base layer of tape, and back again several times. Making sure to stretch the tape as you go to make a strong and secure hold. Make sure you wrap both ends of the handle.
MIFOOTER.jpg (13996 bytes)